SEARCH NOW FOR ALL YOUR AUTOMOTION SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Filter Results
AUTOMATION DIRECT
IRONHORSE
ACNND-4015
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE, NEMA 4X, 460 VAC, 15HP WITH 3-PHASE INPUT, 7-1/2HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 4 FRAME, RS-485, INTEGRATED DYNAMIC BRAKING. O ...
€774.87
Price with VAT:
€922.10
ELECTROCRAFT
AUTOMOTION
ALC20D1-010-1111
DISCONTINUED BY MANUFACTURER, MOTOR CONTROLLER, INPUT: 1 PHASE/ 12.4 AMP / 230 VAC (50/60 HZ), OUTPUT: 3 PHASE / 20 AMP PEAK / 320 VAC (18-20 KHZ)
€1,049.27
Price with VAT:
€1,248.63
AUTOMATION DIRECT
IRONHORSE
HGR-47-010-C
IRONHORSE HEAVY-DUTY HELICAL GEARBOX, 10:1 RATIO, 182/4TC-FACE INPUT, INLINE, 1.25IN DIAMETER OUTPUT SHAFT, NOMINAL 3HP AT 1.0 SF, 1140 LB-IN MECHANICAL OUTPUT TORQUE, TYPE-47 FRAME, CAST IR ...
€487.41
Price with VAT:
€580.01
AUTOMATION DIRECT
SURE MOTION
LARSD2-08T12BP2C
SUREMOTION LINEAR ACTUATOR ASSEMBLY, TWIN ROUND SHAFT, 5.500IN WIDE, 12IN TRAVEL, BALL SCREW, 0.2IN PITCH, CARBON STEEL RAIL.
€2,506.39
Price with VAT:
€2,982.61
AUTOMATION DIRECT
IRONHORSE
HMC-265A30-22-FB
IRONHORSE IEC CONTACTOR, 265A, (3) N.O. POWER POLES, (2) N.O./(2) N.C. AUXILIARY CONTACTS, 100-240 VAC (50/60HZ)/100-200 VDC COIL VOLTAGE, LOW CONSUMPTION ELECTRONIC.
€477.87
Price with VAT:
€568.67
AUTOMATION DIRECT
IRONHORSE
WG-262-040-H
IRONHORSE HEAVY-DUTY WORM GEARBOX, 40:1 RATIO, NEMA 56C INPUT, HOLLOW, 1.4375IN DIAMETER OUTPUT SHAFT, NOMINAL 1.85HP AT 1.0 SF, 1919 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTANCE, ...
€435.94
Price with VAT:
€518.77
AUTOMATION DIRECT
IRONHORSE
HMMP-32HR-0.16
IRONHORSE MANUAL MOTOR PROTECTOR, ROTARY, 0.16A, THERMAL OVERLOAD, 0.1-0.16A ADJUSTABLE, 2.1A INSTANTANEOUS TRIP RATING, 45MM FRAME.
€44.89
Price with VAT:
€53.42
AUTOMATION DIRECT
IRONHORSE
HMX1-AUX31-F
IRONHORSE FIELD INSTALLABLE AUXILIARY CONTACT, FRONT MOUNT, (3) N.O./(1) N.C. CONTACT(S), 6A @ 120 VAC/0.55A @ 120 VDC, SCREW TERMINAL. FOR USE WITH HMC-9 TO HMC-150 CONTACTORS.
€12.09
Price with VAT:
€14.38
AUTOMATION DIRECT
IRONHORSE
HMMP-32HR-6
IRONHORSE MANUAL MOTOR PROTECTOR, ROTARY, 6A, THERMAL OVERLOAD, 4.0-6.0A ADJUSTABLE, 78A INSTANTANEOUS TRIP RATING, 45MM FRAME.
€45.34
Price with VAT:
€53.95
AUTOMATION DIRECT
IRONHORSE
MTPM-BRUSH-4
IRONHORSE DC MOTOR BRUSHES, REPLACEMENT. PACKAGE OF 2. FOR USE WITH IRONHORSE 1/4HP AND 1/5HP 12 VDC OR 24 VDC MTPM, MTGR, MTGP AND VP1 SERIES PERMANENT MAGNET DC MOTORS AND GEARMOTORS. (2) ...
€34.88
Price with VAT:
€41.50
AUTOMATION DIRECT
IRONHORSE
GSDA-MREV
IRONHORSE GSD SERIES MANUAL REVERSE SWITCH, 10A, FIELD INSTALLABLE, SCREW TERMINALS. FOR USE WITH ALL GSD SERIES DC DRIVES.
€104.63
Price with VAT:
€124.51
AUTOMATION DIRECT
SURE MOTION
DC-JS65-98A
SUREMOTION DRIVE COUPLING SPIDER, JAW TYPE, SIZE 65, POLYURETHANE, 98A DUROMETER. FOR USE WITH DC-JAC65 SERIES HUBS.
€19.18
Price with VAT:
€22.83
AUTOMATION DIRECT
SURE MOTION
DC-DLSS30-10
SUREMOTION DRIVE COUPLING, DOUBLE LOOP, STAINLESS STEEL, SETSCREW, SIZE 30, 5/8IN BORE.
€49.21
Price with VAT:
€58.55
AUTOMATION DIRECT
SURE MOTION
DC-DLSS10-04
SUREMOTION DRIVE COUPLING, DOUBLE LOOP, STAINLESS STEEL, SETSCREW, SIZE 10, 1/4IN BORE.
€38.85
Price with VAT:
€46.23
AUTOMATION DIRECT
SURE MOTION
DC-DDS33
SUREMOTION DRIVE COUPLING TORQUE DISC, OLDHAM, SIZE 33, DELRIN. FOR USE WITH DC-DAC33 SERIES HUBS.
€9.50
Price with VAT:
€11.30
AUTOMATION DIRECT
SURE MOTION
DC-DDS25
SUREMOTION DRIVE COUPLING TORQUE DISC, OLDHAM, SIZE 25, DELRIN. FOR USE WITH DC-DAC25 SERIES HUBS.
€4.19
Price with VAT:
€4.99
AUTOMATION DIRECT
SURE MOTION
170XL025NG
SUREMOTION TIMING BELT, 1/5IN XL PITCH, 1/4IN WIDE, 85 TOOTH, 17IN PITCH LENGTH (CIRCUMFERENCE), NEOPRENE, FIBERGLASS REINFORCED.
€3.77
Price with VAT:
€4.49
AUTOMATION DIRECT
IRONHORSE
ACNND-25P0
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE, NEMA 4X, 230 VAC, 5HP WITH 3-PHASE INPUT, 2HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 2 FRAME, RS-485, INTEGRATED DYNAMIC BRAKING. OPTION ...
€429.04
Price with VAT:
€510.55
AUTOMATION DIRECT
IRONHORSE
ACNND-21P0
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE, NEMA 4X, 230 VAC, 1HP WITH 3-PHASE INPUT, 1/2HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 1 FRAME, RS-485, INTEGRATED DYNAMIC BRAKING. OPTI ...
€238.26
Price with VAT:
€283.53
AUTOMATION DIRECT
IRONHORSE
ACN-21P0
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE WITH DISCONNECT, NEMA 4X, 230 VAC, 1HP WITH 3-PHASE INPUT, 1/2HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 1 FRAME, RS-485, INTEGRATED DYNAM ...
€363.43
Price with VAT:
€432.48
AUTOMATION DIRECT
IRONHORSE
ACN-20P5
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE WITH DISCONNECT, NEMA 4X, 230 VAC, 1/2HP WITH 3-PHASE INPUT, 1/6HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 1 FRAME, RS-485, INTEGRATED DYN ...
€357.39
Price with VAT:
€425.29
AUTOMATION DIRECT
IRONHORSE
ACNND-23P0
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE, NEMA 4X, 230 VAC, 3HP WITH 3-PHASE INPUT, 1-1/2HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 2 FRAME, RS-485, INTEGRATED DYNAMIC BRAKING. OP ...
€320.27
Price with VAT:
€381.12
AUTOMATION DIRECT
IRONHORSE
ACN-232C
IRONHORSE PROGRAMMING/COMMUNICATION CABLE, 3.2FT/1M CABLE LENGTH, RS-232 (RJ45 8P8C) TO USB A. FOR USE WITH IRONHORSE ACN SERIES DRIVES.
€83.74
Price with VAT:
€99.65
AUTOMATION DIRECT
IRONHORSE
ACNND-20P5
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE, NEMA 4X, 230 VAC, 1/2HP WITH 3-PHASE INPUT, 1/6HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 1 FRAME, RS-485, INTEGRATED DYNAMIC BRAKING. OP ...
€202.00
Price with VAT:
€240.38
AUTOMATION DIRECT
IRONHORSE
ACN-VFDS
IRONHORSE WINDOWS CONFIGURATION AND PROGRAMMING SOFTWARE, USB OR FREE DOWNLOAD. FOR USE WITH IRONHORSE ACG AND ACN SERIES DRIVES. REQUIRES PC SERIAL PORT, USB-RS232-1 OR USB-485M SERIAL ADAP ...
€8.29
Price with VAT:
€9.86
AUTOMATION DIRECT
IRONHORSE
GSD4A-240-6C
IRONHORSE GSD4A SERIES DC GENERAL PURPOSE DRIVE, 120/240 VAC, 1-PHASE, 1/8 TO 1/2HP AT 90 VDC AND 1/4 TO 1HP AT 180 VDC, 6A, OPEN FRAME, PANEL MOUNT, FIELD-INSTALL REVERSE, POTENTIOMETER INP ...
€127.30
Price with VAT:
€151.48
AUTOMATION DIRECT
IRONHORSE
MTCP2-003-3BD36
IRONHORSE MTCP2 PREMIUM EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE, INVERTER RATED AND SEVERE DUTY, 3HP, 3-PHASE, 230/460 VAC, SUITABLE FOR 208 VAC AT 60 HZ, 3600RPM, TEFC, NEMA 182T FRA ...
€359.98
Price with VAT:
€428.37
AUTOMATION DIRECT
SURE MOTION
LAVLACC-007
SUREMOTION REPAIR KIT, FOR USE WITH LAVL2-60TXXLP5 ACTUATORS, INCLUDES NUT, BUSHINGS, END BEARINGS AND OIL SYRINGE.
€333.93
Price with VAT:
€397.38
AUTOMATION DIRECT
IRONHORSE
MTRP-001-3BD18
IRONHORSE MTR PREMIUM EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE AND INVERTER RATED, 1HP, 3-PHASE, 208-230/460 VAC, 1800RPM, TEFC, NEMA 56C/HC FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID ...
€264.71
Price with VAT:
€315.00
AUTOMATION DIRECT
SURE MOTION
APB100MXL025B-312
TIMING PULLEY, ALUMINUM, 0.08IN MXL PITCH, 100 TOOTH, 2.546IN PITCH DIAMETER, 5/16IN BORE, HUB WITHOUT FLANGES, FOR USE WITH 1/4IN WIDE BELT
€44.03
Price with VAT:
€52.39
AUTOMATION DIRECT
SURE MOTION
LARSACC-005
SUREMOTION SINGLE PILLOW BLOCK, LINEAR BALL BEARING, 1.88IN OVERALL LENGTH, 3/4IN INSIDE DIAMETER, ALUMINUM HOUSING. FOR USE WITH 3/4IN DIAMETER SUREMOTION SHAFTS.
€82.01
Price with VAT:
€97.59
AUTOMATION DIRECT
SURE MOTION
LARSACC-003
SUREMOTION SINGLE PILLOW BLOCK, LINEAR BALL BEARING, 2.81IN OVERALL LENGTH, 1IN INSIDE DIAMETER, ALUMINUM HOUSING. FOR USE WITH 1IN DIAMETER SUREMOTION SHAFTS.
€106.18
Price with VAT:
€126.35
AUTOMATION DIRECT
SURE MOTION
APB24L050BF-500
TIMING PULLEY, ALUMINUM, 3/8IN L PITCH, 24 TOOTH, 2.865IN PITCH DIAMETER, 1/2IN BORE, HUB WITH FLANGES, FOR USE WITH 1/2IN WIDE BELT
€69.06
Price with VAT:
€82.18
AUTOMATION DIRECT
SURE MOTION
APB20L050BF-500
TIMING PULLEY, ALUMINUM, 3/8IN L PITCH, 20 TOOTH, 2.387IN PITCH DIAMETER, 1/2IN BORE, HUB WITH FLANGES, FOR USE WITH 1/2IN WIDE BELT
€47.48
Price with VAT:
€56.50
AUTOMATION DIRECT
SURE MOTION
APB18XL037BF-250
TIMING PULLEY, ALUMINUM, 1/5IN XL PITCH, 18 TOOTH, 1.146IN PITCH DIAMETER, 1/4IN BORE, HUB WITH FLANGES, FOR USE WITH 3/8IN WIDE BELT
€16.40
Price with VAT:
€19.52
AUTOMATION DIRECT
SURE MOTION
APB16XL037AF-250
TIMING PULLEY, ALUMINUM, 1/5IN XL PITCH, 16 TOOTH, 1.019IN PITCH DIAMETER, 1/4IN BORE, NO HUB WITH FLANGES, FOR USE WITH 3/8IN WIDE BELT
€16.40
Price with VAT:
€19.52
AUTOMATION DIRECT
SURE MOTION
APB10L050BF-375
SUREMOTION TIMING PULLEY, ALUMINUM, 3/8IN L PITCH, 10 TOOTH, 1.194IN PITCH DIAMETER, 3/8IN BORE, HUB WITH FLANGES. FOR USE WITH 1/2IN WIDE BELT.
€22.44
Price with VAT:
€26.71
AUTOMATION DIRECT
IRONHORSE
WGA-30M-ACC1
IRONHORSE OUTPUT FLANGE, FOR USE WITH ALL WGA-30M SERIES GEARBOXES. MOUNTING HARDWARE INCLUDED.
€12.09
Price with VAT:
€14.38
AUTOMATION DIRECT
SURE MOTION
APB40XL037B-312
TIMING PULLEY, ALUMINUM, 1/5IN XL PITCH, 40 TOOTH, 2.546IN PITCH DIAMETER, 5/16IN BORE, HUB WITHOUT FLANGES, FOR USE WITH 3/8IN WIDE BELT
€36.26
Price with VAT:
€43.15
AUTOMATION DIRECT
IRONHORSE
WGA-50M-ACC5
IRONHORSE OUTPUT COVER, FOR USE WITH ALL WGA-50M SERIES GEARBOXES. MOUNTING HARDWARE INCLUDED.
€12.09
Price with VAT:
€14.38
AUTOMATION DIRECT
IRONHORSE
WGA-50M-ACC3
IRONHORSE GEARBOX SINGLE OUTPUT SHAFT, 1IN. FOR USE WITH WGA-50M NEMA SERIES GEARBOXES. (3) KEYS, (1) SPACER AND (1) RETAINING RING INCLUDED.
€20.72
Price with VAT:
€24.65
AUTOMATION DIRECT
IRONHORSE
WGA-50M-ACC2
IRONHORSE TORQUE ARM, FOR USE WITH ALL WGA-50M SERIES GEARBOXES. MOUNTING HARDWARE INCLUDED.
€20.72
Price with VAT:
€24.65
AUTOMATION DIRECT
SURE MOTION
DC-DAC33-12M
SUREMOTION DRIVE COUPLING HUB, OLDHAM, ALUMINUM ALLOY, CLAMP, SIZE 33, 12MM BORE. REQUIRES DC-DDS33 TORQUE DISC.
€33.67
Price with VAT:
€40.06
AUTOMATION DIRECT
SURE MOTION
DC-DAC25-12M
SUREMOTION DRIVE COUPLING HUB, OLDHAM, ALUMINUM ALLOY, CLAMP, SIZE 25, 12MM BORE. REQUIRES DC-DDS25 TORQUE DISC.
€24.17
Price with VAT:
€28.76
AUTOMATION DIRECT
IRONHORSE
HMX2-LUG-CR
IRONHORSE BOX TYPE WIRING LUG, LINE OR LOAD MOUNT, 2 OPENINGS, #3 AWG-4/0 MCM WIRE(S). PACKAGE OF 3. FOR USE WITH HMC-265 TO HMC-400 CONTACTORS.
€71.65
Price with VAT:
€85.26
AUTOMATION DIRECT
IRONHORSE
HMC-40A30-22-AS
IRONHORSE IEC CONTACTOR, 40A, (3) N.O. POWER POLES, (2) N.O./(2) N.C. AUXILIARY CONTACTS, 120 VAC (50/60HZ) COIL VOLTAGE.
€63.88
Price with VAT:
€76.02
AUTOMATION DIRECT
IRONHORSE
WGA-30M-060-H1
IRONHORSE MEDIUM-DUTY WORM GEARBOX, 60:1 RATIO, NEMA 56C INPUT, HOLLOW, 0.625IN DIAMETER OUTPUT SHAFT, NOMINAL 0.12HP AT 1.0 SF, 134 LB-IN MECHANICAL OUTPUT TORQUE, 30MM CENTER DISTANCE, CAS ...
€123.76
Price with VAT:
€147.27
AUTOMATION DIRECT
IRONHORSE
MTPM-BRUSH-7
IRONHORSE DC MOTOR BRUSHES, REPLACEMENT. PACKAGE OF 2. FOR USE WITH IRONHORSE 1/10HP OR SMALLER 90 VDC OR 180 VDC MTPM, MTGR, MTGP AND VP1 SERIES PERMANENT MAGNET DC MOTORS AND GEARMOTORS. ( ...
€24.41
Price with VAT:
€29.05
